Engineering guide
Grain Handling Gear Design Considerations
Dust, variable bulk flow, long conveyors, repeated starts and jam loads can dominate the design.
AuthorEver-power Custom Worm Gear Engineering Team
StatusHuman technical review required
PurposeRFQ preparation
Not a substituteApproved drawings and tests
Step 1
Load cases
- Normal flow at expected moisture
- Empty and loaded start
- Plugging, bridging and foreign objects
- Emergency stop, restart and reversal
- Seasonal idle and corrosion
Step 2
System data
- Auger diameter, pitch, length and fill
- Elevator load, tension, head drive and backstop
- Conveyor length, incline, type and take-up
- Bin sweep radius and changing load
- Gate force, holding and manual override
Step 3
Safety and maintenance
- Combustible dust and guarding need machine-level review
- Plan lubricant, seals, alignment checks and spares for harvest season
Request for quotation
Apply this checklist to your drawing
Share the drawing, quantity, material, heat treatment, accuracy requirement and application for RFQ review.